Extension Pole 350BP-2

GASTEC Extension Pole 350BP-2

GASTEC Extension Pole 350BP-2 Telescopic Fiberglass Sampler

High Reach. Ground Level. Elevated Sampling Without Ladders.

The GASTEC Extension Pole 350BP-2 is a heavy-duty, ultra-lightweight telescopic fiberglass sampling pole engineered to reach high ceilings, elevated ventilation ducts, industrial flue stacks, and overhead pipe flanges up to 2.8 meters high. Designed to position GASTEC detector tubes and sampling lines precisely at the emission source while the operator remains safely on the ground, it eliminates the fall hazards, permits, and costs of setting up ladders or scaffolding.

2.8 mMaximum Telescopic Reach
FiberglassLightweight & Non-Conductive
No ScaffoldingEliminates Ladder Fall Hazards
< 1.5 kgEffortless Single-Operator Maneuvering

2.8 Meter Telescopic Reach

Smooth multi-stage telescopic fiberglass sections extend and lock securely at any intermediate height.

Non-Conductive Dielectric Construction

High-grade fiberglass composite protects operators near overhead electrical conduits and machinery.

Zero Ladders or Scaffolding Required

Samples elevated gas emissions directly from ground level, dramatically improving site safety compliance.

Secure Clamp-Lock Collars

Twist-lock cam collars hold extended sections rigid without slipping, bending, or wobbling.

Dedicated Tube / Probe Tip Mount

Engineered tip fixture firmly holds the detector tube intake or sampling line at the target source.

Compact Collapsible Transport

Collapses down to a compact carrying length that fits easily into standard vehicle trunks.

Elevated Reach Workflow. Ground-Level Safety for High-Level Sampling.

01

Mount Tube or Line

Attach the detector tube or remote sampling line securely into the pole head rubber clamping sleeve.

02

Extend to Emission Source

Release the twist-lock collar collars, extend the fiberglass sections to the target duct height, and lock firmly.

03

Draw Sample from Ground

Operate the sampling pump from the ground end; once the draw is complete, lower the pole to read the tube.

GASTEC 350BP-2 Extension Pole
04

Multi-Stage Rigidity

Precision fiberglass wall thickness prevents excessive pole flexing when fully extended horizontally or vertically.

05

Chemical-Resistant Hardware

Anodized fittings and composite clamps withstand acid fumes and industrial atmospheric exposure.

06

Quick-Connect Ground Adapter

Permits direct coupling of the GASTEC GV-100S pump or automated air sampler at the bottom end.

Overhead HVAC Exhaust & Ductwork

Samples fumes, VOCs, and airflow contaminants directly at ceiling diffusers and exhaust hoods.

Industrial Pipe Flanges & Valves

Reaches elevated pipe bridges and overhead chemical headers to check for hazardous fugitive emissions.

Boiler Flues & Stack Breaches

Samples combustion gases (CO, CO₂, SO₂, NOₓ) through sampling ports located high above the boiler room floor.

Warehouse Ceiling Gas Stratification

Profiles lighter-than-air toxic gas pockets (such as Ammonia or Methane) trapped under facility rooflines.

Overhead Crane & Catwalk Audits

Tests air quality around hot manufacturing bays and metal smelting areas before maintenance crews ascend.

Deep Pits & Manholes from Above

Can also be oriented vertically downward to position detector tubes inside drainage trenches and sumps.

The Specs Speak for Themselves

Structural benchmarks of the GASTEC 350BP-2 Telescopic Extension Pole.

Did you know?

2.8 Meters

full telescopic reach allows workers to sample ceiling ducts up to 4.5 meters high from ground

Did you know?

Non-Conductive

fiberglass construction ensures electrical isolation near overhead factory lighting and wiring

Did you know?

Zero Fall Risk

keeps workers firmly planted on the floor, eliminating working-at-height permits and ladder falls

GASTEC Extension Pole 350BP-2 Technical Specifications

Telescopic lengths, construction materials, weight, and mechanical compatibility.

Specification ParameterDetails
Product ModelGASTEC Extension Pole 350BP-2 (Part No. 350BP-2)
Maximum Extended LengthApprox. 2.8 meters
Collapsed Storage LengthApprox. 1.0 meter
Pole MaterialHigh-strength non-conductive dielectric fiberglass composite
Locking MechanismErgonomic compression twist-lock collars
Total WeightApprox. 1.3 kg (ultra-lightweight for single-operator use)
Compatible Sampling MediaStandard GASTEC detector tubes and remote sampling lines
Compatible PumpsGASTEC GV-100S, GV-100LS, GV-110S, GSP-501FT
Carrying CaseSupplied with protective canvas shoulder strap travel bag

Frequently Asked Questions

The pole extends to 2.8 meters. When held by an operator standing at ground level, it easily reaches sampling points located 4.5 meters (15 feet) above the floor.
Yes. The pole is manufactured from high-dielectric non-conductive fiberglass composite, reducing electrical hazard risks when working around overhead cables and industrial busbars.
After drawing the sample using the connected line and pump, the operator simply collapses the pole downward to inspect the stained detector tube at eye level.
Yes! The 350BP-2 can be pointed downward into open trenches, sumps, and basins just as easily as upward toward ceilings.
The reinforced multi-ply fiberglass walls provide exceptional rigidity, keeping horizontal sag minimal during duct inspections.