Permeater PD-1C
GASTEC Permeater PD-1C Standard Gas Generator
Continuous. Stable. Precision Trace Gas Generation.
The GASTEC Permeater PD-1C is a laboratory-grade standard gas generation instrument engineered for sensor calibration, gas analyzer verification, and environmental research. Using temperature-controlled Teflon permeation tubes and diffusion tubes, the PD-1C delivers a steady, reproducible stream of ultra-low concentration span gas using standard air or nitrogen, eliminating the costly shelf-life and handling hazards of compressed calibration cylinders.
Continuous Stable Gas Output
Maintains uninterrupted calibration gas delivery with steady concentration over days and weeks.
Wide Dynamic Concentration Control
Generates trace concentrations from parts-per-billion (ppb) to parts-per-million (ppm) with ease.
Rigorous Physical Traceability
Concentration is verified directly from gravimetric tube weight loss and mass dilution flow rates.
Dual Generation Technologies
Supports both Teflon permeation tubes (for gases/liquids under vapor pressure) and diffusion tubes (for volatile solvents).
Precise Temperature Chamber
Integrated heating water bath maintains constant internal temperature to within ±0.15°C.
Touchscreen Flow Calculation
Digital user interface assists with dilution calculations, heating controls, and flow parameters.
Continuous Diffusion Principle. Engineered for Calibration Precision.
Filling & Temperature Setup
Fill diffusion tube with pure reagent liquid using syringe and place in constant-temperature chamber.
Controlled Steady Diffusion
Liquid evaporates and diffuses at a constant, highly predictable rate governed by tube physical geometry.
Continuous Calibration Stream
A metered flow of dilution carrier gas (air or nitrogen) sweeps over the tube, producing stable span gas.
Thermal Regulated Core
High-precision heating controller eliminates ambient temperature fluctuations from affecting vapor rates.
Mass Flow Controller
Built-in mass flow meters guarantee precise 0.2 to 10 L/min dilution ratios.
Universal Multi-Gas Support
Generate SO₂, NO₂, Cl₂, Benzene, Toluene, H₂S, and hundreds of custom organic/inorganic gases.
Gas Detector Span Calibration
Calibrates fixed and portable gas detectors with fresh, non-degraded trace reactive gases.
Gas Chromatography & Analytical R&D
Supplies reliable multi-point calibration standards for GC-MS, FTIR, and photoacoustic spectrometers.
Continuous Ambient Air Stations
Performs daily automated span checks on governmental ambient air quality monitoring stations.
Odor & Semiconductor Cleanrooms
Generates sub-ppm levels of volatile odor compounds and corrosive wafer fab cleanroom contaminants.
Toxic Gas Sensor Testing
Evaluates sensor response time, cross-sensitivity, and long-term sensor drift under controlled flows.
Industrial Hygiene Equipment Audits
Validates colorimetric detector tubes and passive dosimeter badges against certified standard gas.
The Specs Speak for Themselves
Laboratory engineering specifications for the GASTEC PD-1C Permeater Gas Generator.
±0.15°C
temperature control precision ensures consistent vapor diffusion rates around the clock
10 Tubes
maximum internal chamber capacity allows multi-component calibration gas blending
Zero Waste
eliminates the short expiration dates and disposal hazards of high-pressure span gas cylinders
GASTEC Permeater PD-1C Technical Specifications
Dilution flow parameters, chamber capacities, electrical requirements, and physical dimensions.
| Specification Parameter | Details |
|---|---|
| Product Model | GASTEC Permeater PD-1C Standard Gas Generator |
| Generation Methods | Teflon permeation tube & glass diffusion tube |
| Carrier / Dilution Gas | Nitrogen (N₂) or clean compressed air |
| Dilution Flow Rate Range | 0.2 to 10 L/min |
| Flow Accuracy | ±3.7% (1–10 L/min), ±7% (0.4–1 L/min), ±13.2% (0.2–0.4 L/min) |
| Temperature Control Range | (Room Temp + 5°C) to 50°C (Stability: ±0.15°C) |
| Tube Chamber Capacity | Standard tubes: 10 pcs / H-size: 5 pcs / Diffusion tubes: 4 pcs |
| Power Supply | 100–240 V AC, 50/60 Hz (Power consumption: approx. 160 W) |
| Dimensions (W × H × D) | Approx. 250 × 340 × 315 mm |
| Weight | Approx. 14 kg (without water) |
| Compliance Standards | EN 61010-1, EN 61326-1, EN IEC 63000 (RoHS) |
